Remove unused node/app-defaults.conf.

Adam Heath
Showing 1 changed file with 0 additions and 374 deletions
node/files/app-defaults.conf
--- a/node/files/app-defaults.conf deleted 100644 → 0
View file @f3e6b79
+++ b/node/files/app-defaults.conf deleted 100644 → 0
View file @f3e6b79
-; Per pool prefix
-; It only applies on the following directives:
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-prefix = /srv/$pool
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
-;                            a specific port;
-;   'port'                 - to listen on a TCP socket to all addresses on a
-;                            specific port;
-;   '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = 9000
-; Set listen(2) backlog.
-; Default Value: 128 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = 128
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-;                 mode is set to 0666
-;listen.owner = www-data
-;listen.group = www-data
-;listen.mode = 0666
-; List of ipv4 addresses of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-;   static  - a fixed number (pm.max_children) of child processes;
-;   dynamic - the number of child processes are set dynamically based on the
-;             following directives. With this process management, there will be
-;             always at least 1 children.
-;             pm.max_children      - the maximum number of children that can
-;                                    be alive at the same time.
-;             pm.start_servers     - the number of children created on startup.
-;             pm.min_spare_servers - the minimum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is less than this
-;                                    number then some children will be created.
-;             pm.max_spare_servers - the maximum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is greater than this
-;                                    number then some children will be killed.
-;  ondemand - no children are created at startup. Children will be forked when
-;             new requests will connect. The following parameter are used:
-;             pm.max_children           - the maximum number of children that
-;                                         can be alive at the same time.
-;             pm.process_idle_timeout   - The number of seconds after which
-;                                         an idle process will be killed.
-; Note: This value is mandatory.
-pm = ondemand
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI. The below defaults are based on a server without much resources. Don't
-; forget to tweak pm.* to fit your needs.
-; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
-; Note: This value is mandatory.
-pm.max_children = 10
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-pm.start_servers = 1
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 1
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 3
-; The number of seconds after which an idle process will be killed.
-; Note: Used only when pm is set to 'ondemand'
-; Default Value: 10s
-;pm.process_idle_timeout = 10s;
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-;pm.max_requests = 500
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. It shows the following informations:
-;   pool                 - the name of the pool;
-;   process manager      - static, dynamic or ondemand;
-;   start time           - the date and time FPM has started;
-;   start since          - number of seconds since FPM has started;
-;   accepted conn        - the number of request accepted by the pool;
-;   listen queue         - the number of request in the queue of pending
-;                          connections (see backlog in listen(2));
-;   max listen queue     - the maximum number of requests in the queue
-;                          of pending connections since FPM has started;
-;   listen queue len     - the size of the socket queue of pending connections;
-;   idle processes       - the number of idle processes;
-;   active processes     - the number of active processes;
-;   total processes      - the number of idle + active processes;
-;   max active processes - the maximum number of active processes since FPM
-;                          has started;
-;   max children reached - number of times, the process limit has been reached,
-;                          when pm tries to start more children (works only for
-;                          pm 'dynamic' and 'ondemand');
-; Value are updated in real time.
-; Example output:
-;   pool:                 www
-;   process manager:      static
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          62636
-;   accepted conn:        190460
-;   listen queue:         0
-;   max listen queue:     1
-;   listen queue len:     42
-;   idle processes:       4
-;   active processes:     11
-;   total processes:      15
-;   max active processes: 12
-;   max children reached: 0
-;
-; By default the status page output is formatted as text/plain. Passing either
-; 'html', 'xml' or 'json' in the query string will return the corresponding
-; output syntax. Example:
-;   http://www.foo.bar/status
-;   http://www.foo.bar/status?json
-;   http://www.foo.bar/status?html
-;   http://www.foo.bar/status?xml
-;
-; By default the status page only outputs short status. Passing 'full' in the
-; query string will also return status for each pool process.
-; Example:
-;   http://www.foo.bar/status?full
-;   http://www.foo.bar/status?json&full
-;   http://www.foo.bar/status?html&full
-;   http://www.foo.bar/status?xml&full
-; The Full status returns for each process:
-;   pid                  - the PID of the process;
-;   state                - the state of the process (Idle, Running, ...);
-;   start time           - the date and time the process has started;
-;   start since          - the number of seconds since the process has started;
-;   requests             - the number of requests the process has served;
-;   request duration     - the duration in µs of the requests;
-;   request method       - the request method (GET, POST, ...);
-;   request URI          - the request URI with the query string;
-;   content length       - the content length of the request (only with POST);
-;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
-;   script               - the main script called (or '-' if not set);
-;   last request cpu     - the %cpu the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because CPU calculation is done when the request
-;                          processing has terminated;
-;   last request memory  - the max amount of memory the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because memory calculation is done when the request
-;                          processing has terminated;
-; If the process is in Idle state, then informations are related to the
-; last request the process has served. Otherwise informations are related to
-; the current request being served.
-; Example output:
-;   ************************
-;   pid:                  31330
-;   state:                Running
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          63087
-;   requests:             12808
-;   request duration:     1250261
-;   request method:       GET
-;   request URI:          /test_mem.php?N=10000
-;   content length:       0
-;   user:                 -
-;   script:               /home/fat/web/docs/php/test_mem.php
-;   last request cpu:     0.00
-;   last request memory:  0
-;
-; Note: There is a real-time FPM status monitoring sample web page available
-;       It's available in: ${prefix}/share/fpm/status.html
-;
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;pm.status_path = /status
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-; The access log file
-; Default: not set
-;access.log = log/$pool.access.log
-; The access log format.
-; The following syntax is allowed
-;  %%: the '%' character
-;  %C: %CPU used by the request
-;      it can accept the following format:
-;      - %{user}C for user CPU only
-;      - %{system}C for system CPU only
-;      - %{total}C  for user + system CPU (default)
-;  %d: time taken to serve the request
-;      it can accept the following format:
-;      - %{seconds}d (default)
-;      - %{miliseconds}d
-;      - %{mili}d
-;      - %{microseconds}d
-;      - %{micro}d
-;  %e: an environment variable (same as $_ENV or $_SERVER)
-;      it must be associated with embraces to specify the name of the env
-;      variable. Some exemples:
-;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
-;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
-;  %f: script filename
-;  %l: content-length of the request (for POST request only)
-;  %m: request method
-;  %M: peak of memory allocated by PHP
-;      it can accept the following format:
-;      - %{bytes}M (default)
-;      - %{kilobytes}M
-;      - %{kilo}M
-;      - %{megabytes}M
-;      - %{mega}M
-;  %n: pool name
-;  %o: ouput header
-;      it must be associated with embraces to specify the name of the header:
-;      - %{Content-Type}o
-;      - %{X-Powered-By}o
-;      - %{Transfert-Encoding}o
-;      - ....
-;  %p: PID of the child that serviced the request
-;  %P: PID of the parent of the child that serviced the request
-;  %q: the query string
-;  %Q: the '?' character if query string exists
-;  %r: the request URI (without the query string, see %q and %Q)
-;  %R: remote IP address
-;  %s: status (response code)
-;  %t: server time the request was received
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;  %T: time the log has been written (the request has finished)
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;  %u: remote user
-;
-; Default: "%R - %u %t \"%m %r\" %s"
-;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = log/$pool.log.slow
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_terminate_timeout = 0
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-;       possible. However, all PHP paths will be relative to the chroot
-;       (error_log, sessions.save_path, ...).
-; Default Value: not set
-; chroot = $prefix
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-; chdir = /
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-;catch_workers_output = yes
-; Limits the extensions of the main script FPM will allow to parse. This can
-; prevent configuration mistakes on the web server side. You should only limit
-; FPM to .php extensions to prevent malicious users to use other extensions to
-; exectute php code.
-; Note: set an empty value to allow all extensions.
-; Default Value: .php
-;security.limit_extensions = .php .php3 .php4 .php5
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'.
-;   php_admin_value/php_admin_flag - these directives won't be overwritten by
-;                                     PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr)
-; Default Value: nothing is defined by default except the values in php.ini and
-;                specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/php5-fpm/error.log
-php_admin_value[error_log] = /dev/stderr
-php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M